• +38 050 474 21 43

(050) 474-21-42

For agro-enterprises and farming companies

Micronutrient fertilizer ORAKUL® colofermine of ferrum
Composition g/L
Ferrum Fe 65
Nitrogen N 73
Sulfur SO3 93
Colofermine 606
Packaging: 100 mL
1 L
5 L
10 L

Micronutrient fertilizer ORAKUL® colofermine of ferrum

ORAKUL® colofermine of ferrum is a concentrated micronutrient fertilizer for foliar feeding of field, vegetable and perennial crops.
 
ORAKUL® colofermine of ferrum eliminates effectively ferrum deficiency in plants. It does not contain any ballast additives, so it does not cause leaf burn. It is completely absorbed through the leaf surface of plants. 

Ferrum is directly involved in the formation of chlorophyll, it is a part of a series of enzymes, influences the respiration rate of plants.

Particularly sensitive to iron deficiency are potatoes, cabbage, tomatoes, corn, legumes, fruit crops and grapes. Iron deficiency is most often observed on calcareous soils. Phosphate fertilizers also affect the solubility of iron: adition of high doses of it promotes the formation of low-soluble iron phosphate in the soil.

When there is an iron deficiency, chlorosis develops. In leaves chlorophyll formation is broken down, leaves lose their green color, darken and fall prematurely. Plant growth slows down.

At the first signs of chlorosis or as a preventive measure, when there is a low content of iron in the soil, it is necessary to carry out foliar treatment. Application of ORAKUL® colofermine of ferrum no later than 5 days after the onset of the disease restores the color of the leaves. The formulation contains a high concentration of ions of iron, which provides a reduction in dose of its application, and subsequently the costs per hectare.

Sulfur prevents the destruction of chloroplasts, which makes photosynthesis the most efficient. Nitrogen in ORAKUL® colofermine of ferrum is in ammonium and amide form, which enhances root development. ORAKUL® colofermine of ferrum can be also used in hard water. Active substance of the formulation prevents from calcium sulphate (gypsum) formation, which can lead to breakdown of spraying machinery.

ORAKUL® colofermine of ferrum has a significant physiological effect on plants, namely:
  • restores the color of discolored leaves;
  • improves the water-holding capacity of plant tissues, increases viscosity of protoplasm and osmotic pressure;
  • accelerates the rate of chlorophyll formation, prevents the destruction of chloroplasts, all which makes photosynthesis the most efficient;
  • stabilizes the intensity of plant respiration and redox processes;
  • enhances root development.
It is recommended for use in conjunction with VIMPEL® plant growth stimulator .
 
Recommended technologies

APPLICATION

CropsApplication stagesApplication rate, L/ha
Spiked cerealstillering
2-3 applications every 10 – 14 days in the period of intensive growth
1.0 - 1.5
Corn, sorghum3-5 leaves
next applications every 10 – 14 days
2.0 - 3.0
Legumes3-5 ternate leaves
next applications every 10 – 14 days up to a cessation of intensive growth
2.0 - 3.0
Sunflower2-4 pairs of leaves
next applications every 10 – 14 days
1.0 - 1.5
Rapeseedrenewal of the vegetation
next applications every 10 – 14 days up to a cessation of intensive growth
1.0 - 1.5
Sugar and fodder beet4-6 leaves
next applications every 10 – 14 days up to closure of leaves between rows
1.0 - 1.5
Potatoessprouts
bud formation
1.0 - 1.5
Grapesbefore flowering
softening of berries
3.0 - 4.0
Orchards and berriesbefore flowering
fruit growing 
3.0 - 4.0
Vegetables and other cropsat the beginning of vegetation,
next applications every 7-10 days up to a cessation of intensive growth  
2.0 - 3.0
1. INFORMATION FOR CONSUMERS: follow the instructions when using the formulation. The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.

2. COMPATIBILITY WITH OTHER FORMULATIONS: the micronutrient fertilizer is applied during the growing season either prophylactically or according to the diagnostics results based on the application regulations. It performs well in tank mixes with plant protection products (unless otherwise specified by the manufacturer of the plant protection products), urea (in the recommended concentrations when using foliar fertilization of agricultural crops according to the crop growth stages), UAN, plant growth regulators, microfertilizers and biological preparations.

3. PREPARATION OF WORKING TANK SOLUTION:

Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!

For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.

Attention! It is possible to use the formulation in hard water. The active substances contained in it do not form compounds with hardness salts (СаSO4٠2H2О), hence the solution does not grow turbid.

If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.

Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.

4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.

Tank mix
Tank mix with UAN
  • Water
  • Plant growth regulators
  • UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
  • Plant protection products
  • ORAKUL® colofermine of ferrum
  • Other micronutrient fertilizers
  • Water
Tank mix with urea
  • Water
  • Plant growth regulators
  • Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
  • Plant protection products
  • ORAKUL® colofermine of ferrum
  • Other micronutrient fertilizers
  • Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!

5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +10...+25 °С (50 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.

Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.


6. STORAGE AND TRANSPORTATION: storage and transportation must be carried out in accordance with ГОСТ 14189 (National State Standard).

The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above 0 ºС below +30 ºС (50 — 86 ºF), in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.

Decrease of temperature below -15 ºС (5 ºF) results in the product decrease of viscosity, the prolonged storage may cause sediment formation.

Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.

According to the conformity №255313/1 of the Ukrainian Cargo Bureau, State Research and Development Institute of the Merchant Marine of Ukraine of the Ministry of Infrastructure of Ukraine is not classified as dangerous cargo and is shipped as safe cargo under general conditions.

7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.

8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.

9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.

10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.

11. STORAGE PERIOD: 5 years.

12. TECHNICAL REGULATION: ТУ У 20.1-24051976-003:2016.

13. CERTIFICATE OF STATE REGISTRATION: series А, № 05205.

14. VOLUME OF PACKAGES: 100 mL, 1 L. 5 L, 10 L.

15. HYDROGEN-ION INDICATOR (pH), units: 6.4 ± 1.0.

16. DENSITY, g/cm3: 1.195 ± 0.02.

17. COLOR (visually): dark brown.

18. ODOUR (organolept.): odourless.