• +38 050 474 21 43

(050) 474-21-42

For agro-enterprises and farming companies

Plant growth stimulator VIMPEL
Composition g/L
Polyethylene glycol (PEG) 770
Extract of humic acid salts 6
Packaging: 10 mL
30 mL
100 mL
1 L
5 L
10 L

Plant growth stimulator VIMPEL

For foreign markets

VIMPEL®
formulation:
  • stimulates growth and development of plants;
  • conducts macro- and microelements;
  • filming agent on seeds and leaves.
DESCRIPTION

Polyetylenglycols with low molecular weight are conductors of macro- and micro elements, as well as other formulations, applied together with VIMPEL® and due to it these elements and formulations penetrate all plant tissues. This results in increased biological activity, photosynthesis and minerals intake speed.

GROWTH STIMULATOR:
  • provides active development of root system and accelerates the development of vegetative characteristics of plants;
  • conducts active substance quickly, increases the efficiency of protectants and fertilizers;
  • increases the production quality due to increasing content of starch, sugar, gluten, fat, etc.
  • increases the plant growth and the germination of seeds,
.. which leads to yield increase (by 10%-30%). 


SOIL ACTIVATOR:

  • activates the plant root transpiration;
  • multiplies the activity of microorganisms in the soil;
  • supports nitrogen fixation,
… which leads to strengthening of plant immunity.

ADAPTOGEN, CRYOPROTECTANT and THERMOPROTECTANT:
  • increases the adaptability of plants in extreme weather conditions;
  • provides seeds protection during long term storage in adverse weather conditions;
  • increases the frost-resistance and the winter-hardiness due to increasing the content of sugar and starch in plants;
  • increases the drought and heat resistance of the plants;
  • enhances the immune system of plants.
… which leads to economic rationalization.

ANTI-STRESS AGENT:
  • accelerates metabolic cellular process;
  • minimizes stress from transplanting;
  • reduces stress due to phytosanitary treatments,
… which leads to superior crop quality.

ADJUVANT, FILMING AGENT and DISEASE INHIBITOR:
  • compatible with all pesticides, macro- and microfertilizers, can be used in tank mixtures with them, increasing their efficiency by 20-25%;
  • increases fixation on the leaf;
  • creates a protective film;
  • enhances the effect of the wed control system;
  • promotes tissue penetration;
  • refines the nutrient absorption process,
… which leads to fewer pesticide treatments and higher resistance to diseases

Among other things VIMPEL® improves flowering, which leads to increase of fruit set.

 
Recommended technologies
 
VIMPEL® APPLICATION RATES
LEAF SPRAYING
 
CROP
 
VIMPEL®
application rates
(kg/ha)

 
Application Stages
 
Number of applications
Cereals
0.500
Tillering, stem elongation, flag leaf stage (booting), inflorescence emergence (if necessary)
1-3
Sunflower
0.500
2-4 pairs of leaves, inflorescence emergence
1-2
Maize
0.500
3-5 leaves, 7-8 leaves
1-2
Legumes
0.500
3-5 trifoliolate leaves, budding
1-2
Potato
0.500
Full shoots (10-15 cm), budding
1-2
Sugar beet
0.500
4-6 leaves, at the stage of rosette growth when leaves cover 30% of the ground
1-2
Vegetables
0.500
3-5 leaves, budding
1-2
Citrus, pomegranate, grape and other garden plants
1.000-1.500
Before flowering, after flowering
1-3
 
VIMPEL® APPLICATION RATES
SEEDS TUBERS AND SEEDLINGS TREATMENT

CROP
VIMPEL® application rates (kg/t)
Cereals, sunflower, maize
0.500
Sugar beet, legumes
0.500
Vegetables
0.500
Potato, garden plants
2-3% solution

1. INFORMATION FOR CONSUMERS: follow the instructions when using the formulation. The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.

2. COMPATIBILITY WITH OTHER FORMULATIONS: performs well in tank mixes with plant protection products (unless otherwise specified by the manufacturer of the plant protection products), urea (in the recommended concentrations when using foliar fertilization of agricultural crops according to the crop growth stages), UAN (urea ammonium nitrate solution), microfertilizers and biological preparations.

3. PREPARATION OF WORKING TANK SOLUTION:

Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!

For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.

Attention! It is possible to use the formulation in hard water. The active substances contained in it do not form compounds with hardness salts. (СаSO4٠2H2О)

If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.

Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.

4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.

Tank mix
Tank mix with UAN
  • Water
  • VIMPEL®
  • UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
  • Plant protection products
  • Micronutrient fertilizers
  • Water
Tank mix with urea
  • Water
  • VIMPEL®
  • Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
  • Plant protection products
  • Micronutrient fertilizers
  • Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!

5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +5... +25 °С (41 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.

Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.


6. STORAGE AND TRANSPORTATION: storage and transportation must be carried out in accordance with ГОСТ 14189 (National State Standard).

The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above -5 ºС below +40 ºС (23 — 104 ºF).

Attention! Due to the high concentration of the active ingredients, storage at low temperatures (-10 ºС / 14 ºF and below) may result in the product decrease of viscosity and its gelling. Increase of ambient temperature causes the increment of liquid viscosity and the formulation returns to its original state. These processes do not affect in any way the formulation active ingredients and its properties, but the prolonged storage may cause sediment formation. Shake thoroughly before using.

Store in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.

Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.

According to the conformity №255313/2 of the Ukrainian Cargo Bureau, State Research and Development Institute of the Merchant Marine of Ukraine of the Ministry of Infrastructure of Ukraine is not classified as dangerous cargo and is shipped as safe cargo under general conditions.

7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.

8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.

9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.

10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.

11. STORAGE PERIOD: 5 years.

12. TECHNICAL REGULATION: ТУ У 20.2-24051976-006:2014.

13. CERTIFICATE OF STATE REGISTRATION: series А, № 05070.

14. VOLUME OF PACKAGES: 10 mL, 30 mL, 100 mL, 1 L. 10 L.