ORAKUL MULTICOMPLEX
- environmentally friendly, highly concentrated, ready for application, convenient and safe to use;
- liquid fertilizer in biologically active form that is quickly dissolved in water;
increases productivity by 10-20%; - contains a balanced set of macro- and micronutrients for the needs of all the crops;
- is highly compatible with pesticides, growth stimulants, fertilizer solutions with a wide range of pH (i.e. those which are used on different types of soil).
The formulation does not crystallize. When the temperature goes down to -15° C, the fluidity of the formulation decreases, and if it is kept under low temperature for a long time, a precipitate may form.
The formulation provides plants with the essential nutrients necessary for their optimal growth and development. The composition of the microfertilizer includes macro- and microelements in easily accessible forms which are well absorbed by plants.
CONTRIBUTES TO INCREASING YIELD BY 15-27%!
- regulation of water movement and reduction of the formation of insoluble compounds in plant cells;
- compensation for the lack of nutrients during unfavorable growth conditions, when the root system cannot ensure their absorption in the required quantity;
- active absorption of nutrients from the soil by plants;
- increase in plant resistance to diseases and stress situations by 30%;
- increase in crop yield by 15-27% and improvement of product quality.
APPLICATION
| Crops | Application stages | Application rate, mL/10 L of water |
|---|---|---|
| Potatoes | full germination bud formation after flowering | 10-20 |
| Strawberries | before flowering after flowering | 10-20 |
| Orchards, berries and grapes | before flowering after flowering beginning of fruit growth | 30-40 |
| Vegetables | intensive growth bud formation beginning of fruiting | 10-20 |
| Coniferous, deciduous and decorative plants, lawns | 400-800 mL of the fertilizer per 100 L of water | |
1. INFORMATION FOR CONSUMERS: follow the instructions when using the formulation. The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.
2. COMPATIBILITY WITH OTHER FORMULATIONS: the micronutrient fertilizer is applied during the growing season either prophylactically or according to the diagnostics results based on the application regulations. It performs well in tank mixes with plant protection products (unless otherwise specified by the manufacturer of the plant protection products), urea (in the recommended concentrations when using foliar fertilization of agricultural crops according to the crop growth stages), UAN, plant growth regulators, microfertilizers and biological preparations.
3. PREPARATION OF WORKING TANK SOLUTION:
Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!
For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.
Attention! It is possible to use the formulation in hard water due to the water softener in its composition. At the same time, if there is high concentration of hardness salts and significant amount of water, it is possible that after some time there will be a slight separation of hardness salts in the form of gypsum (СаSO4٠2H2O). In this case, the amount of sulfur in the solution is slightly reduced. These processes in no way affect the solution usability or cause the possibility of spraying equipment failure, as the formulation is finely dispersed. When forming a tank mixture in hard water, we recommend spraying with the mixing mode turned on. After application of the tank mix, it is necessary to rinse the tank with water to prevent the overgrowth of gypsum crystals.
If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.
Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.
4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.
Tank mix
- Water
- Plant growth regulators
- Plant protection products
- ORAKUL® multicomplex
- Other micronutrient fertilizers (excluding ORAKUL® sulfur active)
- Water
- Water
- Plant growth regulators
- UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
- Plant protection products
- ORAKUL® multicomplex
- Other micronutrient fertilizers
- Water
- Water
- Plant growth regulators
- Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
- Plant protection products
- ORAKUL® multicomplex
- Other micronutrient fertilizers
- Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!
5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +10…+25 °С (50 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.
Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.
6. STORAGE AND TRANSPORTATION: storage and transportation must be carried out in accordance with ГОСТ 14189 (National State Standard).
The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above 0 ºС below +30 ºС (50 — 86 ºF), in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.
Decrease of temperature below -15 ºС (5 ºF) results in the product decrease of viscosity, the prolonged storage may cause sediment formation.
Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.
According to the conformity №255313/1 of the Ukrainian Cargo Bureau, State Research and Development Institute of the Merchant Marine of Ukraine of the Ministry of Infrastructure of Ukraine is not classified as dangerous cargo and is shipped as safe cargo under general conditions.
7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.
8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.
9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.
10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.
11. STORAGE PERIOD: 5 years.
12. TECHNICAL REGULATION: ТУ У 20.1-24051976-003:2016.
13. CERTIFICATE OF STATE REGISTRATION: series А, № 05205.
14. VOLUME OF PACKAGES: 10 mL, 100 mL,1 L. 5 L, 10 L.
15. HYDROGEN-ION INDICATOR (pH), units: 6.0 ± 0.5.
16. DENSITY, g/cm3: 1.248 ± 0.005.
17. COLOR (visually): green.
18. ODOUR (organolept.): distinct.
