Fertigation

Under intensive agricultural production, soil loses significant amounts of nutrients and therefore requires the rapid restoration of its nutrient balance.
To replenish macro- and micronutrient reserves, most farmers use the traditional method of fertilizer application, which involves spreading mineral or organic substances over the surface of the cultivated soil layer. The advantages of this method are its simplicity and relatively low cost. However, it has considerably more disadvantages.
Broadcast application does not ensure uniform fertilizer distribution. Nutrients may overlap in layers or accumulate in certain spots, resulting in uneven distribution — too much in one place and too little in another.
Many fertilizers should not be left on the soil surface because their nutrients can quickly evaporate or be leached away. Incorporating them into the soil requires additional costs.
Another problem is that plants absorb nutrients from poorly water-soluble salts very slowly, while their release requires excessive energy. Many nutrients become fixed in the soil and therefore remain practically unavailable to plant roots, which negatively affects crop yields.
Fertigation provides a solution to this problem. This technology makes it possible to apply fertilizers in the form of a liquid solution, delivering nutrients directly through the main lines of the irrigation system. In this way, nutrients are supplied together with irrigation water directly to the root zone, ensuring their rapid uptake by plants.

The fertigation method was developed in the 1970s and has continued to demonstrate its high efficiency ever since. As a result, the technology has spread rapidly around the world. It was first adopted in countries with highly developed agricultural practices. For example, fertigation is now used on more than 75% of agricultural land in Israel.
The introduction of drip irrigation and hydroponics gave a new impetus to the development and improvement of this method.
Advantages of Fertigation
Fertigation makes it possible to apply fertilizers at optimal times and at recommended rates, adjusting both the amount and composition of nutrients to the plants’ physiological condition and growth stage.
Thanks to fertigation, plant nutrition can be managed precisely and economically, reducing unproductive nutrient losses. First, excessive fertilizer application is avoided. Second, nutrients are used more efficiently, which is particularly important when expensive fertilizers are involved.
Fertigation allows several types of fertilizers to be applied simultaneously, including together with pesticides and other crop protection products, significantly reducing labor and time requirements.
All these factors combined considerably reduce the production cost per unit of agricultural output.
Irrigation and fertigation can be carried out simultaneously both in open fields and in greenhouses, glasshouses and other protected growing structures. This technology is suitable for all field crops, cucurbit crops, vegetables, fruit crops, berries and ornamental plants.
Thus, fertigation makes it possible to:
- Apply nutrients at any stage of the growing season, including the later stages of plant development, which is not possible with conventional fertilizer application methods.
- Maintain optimal nutrient levels in the soil, taking into account its nutrient-holding capacity, crop species, weather conditions and other factors.
- Use fertilizers with maximum efficiency, preventing excessive application and inefficient use.
- Minimize negative environmental impacts, including groundwater pollution, as well as soil salinization and leaching.
- Prevent the accumulation of nitrates and other substances potentially harmful to human health in plants.
- Use complex nutrient solutions containing several types of fertilizers with different physicochemical properties, including hygroscopicity, particle-size distribution, caking tendency and other characteristics.
- Significantly reduce nutrient leaching from the soil.
Another advantage of fertigation is that it reduces the requirements for soil quality. With the introduction of drip irrigation, farmers gained the opportunity to cultivate land that had previously been considered unsuitable for crop production. Today, it is possible to obtain yields from many crops even on sandy and saline soils, as well as on sloping land.
Disadvantages of Fertigation
Obviously, the main disadvantage of fertigation is the relatively high level of initial investment required to purchase and install the necessary equipment.
Another limitation is that this technology requires specialized training and a certain level of technical knowledge. For example, accurate fertilizer rate calculations involve taking numerous factors into account, such as soil composition and moisture content, the specific nutrient requirements of each crop, and the pH level of the water used for irrigation. This also requires regular monitoring of macro- and micronutrient concentrations in the soil.
It is also important to consider that certain components in complex fertilizer mixtures may react with one another and form insoluble precipitates, which can clog and damage the irrigation system’s pipelines.
Preparing the correct nutrient solution by guesswork is not an option, as there is a high risk of overdosing, which can adversely affect plant health. Unlike conventional fertilizer application, fertigation leaves little room for error, and the consequences of mistakes can be extremely damaging.
Therefore, effective use of this method requires appropriately qualified specialists.

Chelated Fertilizers in Fertigation
Water-soluble chelated fertilizers based on organic acids are becoming increasingly popular.
These products are now widely used in fertigation. They are readily absorbed by plants, do not react with the soil or become bound by it. Such fertilizers also have a well-balanced composition, allowing farmers to achieve good results from their application.
ORAKUL® micronutrient fertilizers effectively compensate for nutrient deficiencies, even under unfavorable weather conditions. Numerous trials have demonstrated that the use of these products can increase the yields of certain agricultural crops by up to 30%, while also improving the quality and consumer properties of the harvested produce.
Another advantage of ORAKUL® fertilizers is their compatibility with other types of mineral fertilizers, pesticides and plant growth regulators in the same tank mix.
An additional benefit of these micronutrient fertilizers is that they contain a special component that prevents precipitate formation in hard water, thereby reducing the risk of irrigation systems and sprayers becoming clogged or damaged.
How the Fertigation Method Works
Schematically, the technology works as follows: a concentrated nutrient solution, known as a stock solution, is prepared in a separate tank. A specific amount of liquid fertilizer is then metered out in small doses and introduced into the main water flow, after which it is distributed through the irrigation pipelines together with the irrigation water.
There are many different irrigation system designs based on a similar principle, including tank-based systems, Venturi injectors and various types of injection pumps.
Of course, installing such irrigation modules is not inexpensive. However, there is good news: investments in fertigation can pay for themselves quickly thanks to the high efficiency of this technology.